Screeching Cat Railing

CNC Cutout of screeching cat inserted into porch railing

Recently we completely re-built our aging 2nd story porch. During the process I took the opportunity to add a little flair courtesy of the makerspace’s CNC Router. The idea was to place an emblem into the railing of the porch as decoration. After thinking about the emblem I’d want I decided that I’d never be happy with just one, so I incorporated spring hinges (look carefully below the cat in the photo) that allow me to pull back and replace the emblem at will with ease. With that done the only thing to do was decide on the first emblem. I decided on seasonal/occasion emblems.

Rich showed me a great site with free CNC artwork, some of which was Halloween themed. I downloaded that artwork, selected the screeching cat and had the CNC router cut the cat out of a 2’x2′ plywood. I installed the cat as part of the porch railing as you can see in the photo.  I’m now looking to round up a turkey for Thanksgiving, a snow man for winter, etc.

During the design process TomG had the bright idea to shine a light through the cutout. So I took a high brightness LED out of a malfunctioning flashlight and attached it to some sheet metal on a malleable aluminium boom. The result is that I now have a screeching cat projected down onto the sidewalk below. (It’s too dim for me to capture on camera)

I’m really looking forward to cutting out more shapes on the CNC Router!