Happy Shiny Bolts

Bolts

When you buy a bolt, it doesn’t typically have a nice flat head on it. It’s got a bunch of markings, and usually some sort of part number, or something. Here’s a bolt I found on eBay. Look at all those numbers and letters!

Bolt Close-up

Here’s a close-up I shot of a bolt head. What does it all mean? Well, Brant told me that the manufacturers add these markings to help prevent counterfeit parts. He even mentioned that years ago a building was built with some knock-off fasteners and it collapsed causing terrible damage. Terrible!

Well, I brought a bolt to the makerspace because I wanted it to have a nice smooth and shiny top. Bill**2 was kind enough to show me the new metal buffing area, which has a nice belt sander (which we used to remove the lettering) and 6 (yes, six!) buffing wheels of various grit. I used all six to give my bolt a nice clean shine.

Shiny Bolt

Here’s my bolt after removing the letters and buffing it up. I probably could have done a bit more, but this was still a hundred times better than before I started. And yes, it is hooked up to an AT42QT1010 Capacitive Touch Breakout Board and a Teensy.