Bullet-Proof Coffee Table

awesome beer angled two tone DSC_6274

This weekend, I built a bullet-proof coffee table.

For years, I’ve had a three-foot by four-foot piece of bullet-proof glass that I removed from a bank while working construction there. I saved the glass, thinking that it would make an AWESOME table. Well, I finally got around to building it.

I cut pallet-racking cross-pieces to build a frame that would wrap around the glass. Pallet racks already have a 1.5″ indent in them to hold lumber, which was perfect for a supporting lip for the glass.

The legs were two-inch steel square tube, cut to 18″ long. After cutting the pieces, I tack welded the whole frame together, checked for square, and tested it against the glass. I then did all the welds, capped off the ends of the legs, and ground round the top corners.

After that, it was a coat of primer, a coat of 1980′s bank industrial beige paint, and laying the glass into the frame.

I still wanted to test how bullet-proof it was, but simply, and safer than with a gun. I did have a bowling ball handy! Check out the video for how I made an interesting pattern in the glass!

After I marked the glass, I thought it would look really cool backlit! Once it was dark, I put a temporary light behind the glass, and was very pleased with the results. The cracks light up great! I’ll now have to permanently wire up some lighting under it.

I have a full DIY build write-up on it at Instructables. In fact, it’s in the INDESTRUCTIBLE contest there, and I’d love to get your vote!

Oh, and can anyone stop over and help me move this table? It weighs a TON!

DSC_6165 DSC_6223 DSC_6196 awesome beer angled two tone DSC_6274