Some time back I posted about my RN-42 Carrier Board. The RN-42 is an inexpensive surface mount bluetooth modem. I made a board that converts it to through-hold and exposes a number of the features of the RN-42 that other carrier boards do not.

There was a small error in the original boards: the status LEDs were connected to ground when in was the intent of the RN-42 designers that I connect the LEDs to Vdd. In response to some inquiries about the board, I’ve made a revision of the board that addresses this problem. Here are the updated Gerbers, NC Drill and original Diptrace design files.