More Laser Cutter Artwork….

A laser cut piece, one stacked on top of the other for depth.  The top piece is a cut out featuring an angelic grave stone and the back piece is a picture of a graveyard with some well defined trees.

This is my newest piece, cut and etched on our 60 watt laser cutter.  Both images are from pictures that I took out at a couple of graveyards.  I inverted the image in the background so that the sky was nice and dark and the trees were bright.  Unfortunately, this washed out a lot of the tombstones in front, so I’m going to try re-etching this piece before I offer it up for sale.

The back piece took approximately 1 hour, 20 minutes to etch as a 11.5″ square.  Additionally, I found that the margins are a bit off on the cutter.  The left margin has shifted around 1/8″-1/4″  to the right, so the piece wasn’t perfectly centered.