88nine Lazzored!

Radio Milwaukee Lazzored!

I used the laser cutter to make a Raspberry Pi case, and rather than leave the front of it all boring, I added an 88nine Radio Milwaukee logo to it. (Since I had a project that involves a Raspberry Pi and 88nine, it seemed appropriate.)

Radio Milwaukee Logo

I started with the original 88nine logo, which is brown and orange. I couldn’t find a nice hires version, but a quick web search turned up something that would work…

Radio Milwaukee Logo

To start with, I converted the logo to black and white, since color wasn’t going to matter to the laser cutter…

Radio Milwaukee Logo

I then separated the top bars (which are orange in the original logo) and dithered them to create a visual separation from the bottom part of the logo that was brown in the original.

Radio Milwaukee Logo

Here’s a close-up of the dithering pattern. It’s extremely simple, but it worked. I’ve done a lot of work with halftones and dithering, and you can get extremely complex, but sometimes the simple things just work.

Radio Milwaukee close-up

Here’s a close-up of the final piece of Baltic Birch plywood with the logo etched in it. I’m pretty happy with how it turned out.