No welding? No PPPRoblemS!

If you’re not familiar with the Power Racing Series, it’s a challenge to build and race an electric vehicle. You start with a Power Wheels car and transform it into a powerful machine that can transport a human, and oh yeah, you have a budget of only $500. (Pictured above is a car made by some 15 year old kids a few years ago for Maker Faire Detroit!)

You can find super-cheap (and even free) used Power Wheels cars on craigslist, and usually the batteries are dead and there’s no charger, which doesn’t matter, because we replace all that with more powerful motors, batteries, motor controllers, brakes, etc.

One of the goals of the series has been to get high school age kids involved, but some of the skills needed to build a car may be out of reach of your local high school, such as working with metal. Welding equipment may not be available, and mentors may not have metalworking skills, so we wanted to develop a reference vehicle that uses no welding. We chose to mainly work with wood for our build, but check out the “no-weld car” wiki page for some other builds…

Here’s the start of our frame. It’s all wood, glue, and screws. We’ve utilized a torsion box design for strength. So far we’ve only used a saw, drill, and some clamps. No specialty tools that are out of the reach of your common workshop. We’ve got a long way to go, but we’re going to try to make this car super-cheap, and easy to build, so that many teams (of kids and/or adults) could easily build it. As members of a makerspace, we may tend to forget that not everyone has access to the tools and skills we do.

We’re also working on front wheel spindles build using wood and bolts. Yes, you can buy metal spindles for cheap, but a lot of what we are doing is experimenting with materials and geometry, which should provide some valuable lessons along the way, and it should be cheap/easy to modify things, try-test-try again, and see what the outcome is.

You can check out more about this project on the Milwaukee Makerspace wiki. We’ll do our best to add updates as we go. Hopefully this thing will be ready to race in June at Maker Faire Kansas City!

Leave a Reply

Your email address will not be published. Required fields are marked *