What do you do when you need pictures of a 300lb power wheels car from multiple angles so that someone can create a 3D model?
You build a turn table, a rather big turn table.
But what if I don’t have a really big bearing, you ask.
Well, you use a bunch of little ones – preferably in casters!
This is a metal base with 4 casters from some old equipment that was trash, I drilled a hole in the center and welded a 1/2″ nut to the bottom.
Take 4×4 sheet of plywood, drill a hole in the center. Just because its a quick and dirty project I put a 1/4″ thick washer under the board and figured the weight of the rig would hold it in place
Put it all together and you have a turn table that can support the Little Pink Trike and we 
are ready for the photo shoot!
\
Spinning Little Pink Trike Video on Flickr
Library of Images of the Little Pink Trike on Flickr