All Officers to the Bridge!

Starship Bridge

In preparation for our Artemis Simulator that’s going to be at Maker Faire Milwaukee, we’ve partnered with Betty Brinn Children’s Museum to build a realistic starship bridge. Here’s what we’ve got so far.

Starfleet never produced an episode of How It’s Made, so we’re going to have to do a little guessing along the way when building our bridge. Obviously we still need to install the EPS conduits, Tribble-proof everything, and get the self destruct system up and running. But we’ve got nearly 80 days to get it all done.

Don’t forget to bring your phaser to Maker Faire Milwaukee to check out the final build!

Experiments in optics and image processing

After successfully mating a web cam with my microscopes (http://www.thingiverse.com/thing:216821) and telescope (https://www.youmagine.com/designs/web-cam-adapter-for-meade-telescope-eyepiece), I decided to design and print adapters to mount my Droid Turbo phone on the same scopes (https://www.youmagine.com/designs/microscope-adapter-for-droid-turbo-phone and https://www.youmagine.com/designs/droid-turbo-phone-to-telescope-adapter) so I could shoot higher resolution stills (21 Mp) and 1080p (and even 4k) video.   The telescope adapter fits over a Meade 32mm focal length Super Plössl eyepiece and provides about 47X magnification with the telescope.  I printed a similar adapter for my surgical microscope.

IMG_0995_crop

 

 

 

 

 

 

 

 

 

 

 

 

The telescope adapter firmly grips the phone and the eyepiece.

 

IMG_0993_crop

 

 

 

 

 

 

 

 

 

 

 

 

Initial tests were a little disappointing.  The combination of the phone’s camera and the telescope’s optics has significant pincushion distortion.  The image has only been mirrored L-R and scaled down (original is 21 Mp).  Note the lack of contrast (looking through 1/2 mile of humid air) and the curves in the power line and pole, and even the grass line:

pinch test original

 

 

 

 

 

 

 

 

 

A quick search found that the Gimp has built in transform tools to correct (or create) lens distortion.

 

gimp

 

 

 

 

 

 

 

 

It only took a couple minutes of messing around to get acceptable results.  Here’s the same image with the pincushion distortion corrected (whole image), contrast stretched and white balance corrected (rectangular area).  The pole, power line, and even the grass line now look straight.

pinch test corrected

 

 

 

 

 

 

 

 

 

And here’s the final image with all corrections and cropping applied:

final

 

 

 

 

 

 

 

 

 

 

Next step: photograph known square grids through the microscope and telescope and then create and save some preset corrections to apply with Gimp.

I wonder if something like this exists for video.  Hmmmmm…

 

 

 

 

 

Flaming Lotus is…

Flaming Lotus

Our Power Racing Series team is back for 2015! But, well.. we’re a little smaller. Right now it’s just Ed C. and me (Pete!)

But as you can see from the photo above, we have a body mostly primed. It’s actually been painted a bit more since this photo from two days ago. It’ll be ready to go for Maker Faire Kansas City in (less than) two weeks!

I can hear you saying “Yeah, a body is a great, but where’s the frame, the motors, wheels, controller, brakes, and all that jazz!?”

I present you with this CAD drawing. Everyone knows designing a thing is 95% of building a thing. So we’ve completed 95% of the work… now we have (less than) two weeks left to put it all together. Easy!

CAD Lotus

See you in Kansas City!

Fix Your Symbols

BadSymbol

This Saturday I continued with the commissioning of my unified singing pumpkin controller. I got all the sub-systems working except for the power amplifier. In the picture above, on the left is the pumpkin controller. On the right is a (normal) Arduino amplifier shield using the same amp chip.  That shield works. If you look carefully you can see that the chip pins are mirrored between the two boards.

Mirroring pins is an innocent enough mistake. It happens to everyone once in a while. The problem is that I made the EXACT same mistake on the first round of that amplifier shield. (Notice the R2 on the right hand silk?) Apparently I fixed that problem manually without correcting my library symbol. That was many months ago and I forgot about it, thus resulting in a repeat of the same error on the unified pumpkin controller. Dumb mistake! It would have taken 10 mins at most to fix the symbol.

Don’t be like me, fix your symbols the moment you notice the mistake! You may not get back to it for a while and may not remember there was a problem.

 

Son of MegaMax Enters Instructables 3D Printing Contest

Many 3D printers being given away as prizes!  If I win one I’ll be donating it to my son’s school or other school or library that would like a machine and doesn’t already have one.  To do that I need your votes!

Son of MegaMax

Son of MegaMax

Please see my Instructable here:  http://www.instructables.com/id/An-Almost-Reliable-High-Precision-3D-Printer-Son-o/and vote for me by clicking the little red “vote” ribbon in the upper right corner of the start page.

Thanks!

http://www.instructables.com/id/An-Almost-Reliable-High-Precision-3D-Printer-Son-o/

Maker Faire, as easy as 123…

Maker Faire Countdown!

Last August Brant asked me to add a countdown to Maker Faire Milwaukee on the MMPIS, so I whipped up some code on a remote server and he got it running on the MMPIS display at the space.

Seeing as planning for this year’s event is in full swing, I figured it was time to start the countdown again. Yes, we are counting the days, and the Call for Makers is now open! Got a project, or something you made, or things you want to show off? Submit it, and share it with the world!

Singing Pumpkin Controller

pumpkins pcb smallA few years ago I made animatronic singing pumpkins using an Arduino Uno, a Wave shield, a 16-channel servo/pwm controller, and some DC-DC power converters, all from Adafruit. I designed a single PCB that unified all of that and included a 15W amplifier. Today I completed assembling that board and began its commissioning. I used solder paste and a mylar stencil cut on our laser. Its the first time I have ever soldered a TSSOP package with no shorts.

Anyway, I managed to forget to bring a microSD card, but the program loaded into the AVR OK and is running. All the various power supplies are outputting the correct voltage.  6 volts for the servos, 5 volts for the AVR, and 3.3V for the microSD card and buffer chip. The amplifer gets the raw 12 volts. So, I’m hopeful that over the next week I’ll be able to bring the board completely online.

 

The Turndrawble

The Turndrawble

The Turndrawble is a drawing machine I designed, based loosely on an old vinyl turntable, but instead of playing records, it creates drawings.

The construction was done using stacked layers of wood and acrylic. I wanted to avoid using the typical laser-cut “box” enclosure I usually use. I’m pretty happy with how it turned out.

The Turndrawble

The Turndrawble is meant to be used to create 12″ circular drawings. One of the knobs controls the platter speed, and the other sweeps the arm in and out. Since it’s a new drawing device, it hasn’t been mastered yet, but we’re working on it!

Here’s a short video showing the turndrawble being operated. I’ll probably have it at some future art events for people to try out and see what they can create with it.

There’s a bunch more info about this thing on the Turndrawble project page on my web site.

Sunday Morning Project – A 3D Printed WebCam Mount for a Telescope

I recently acquired a new eyepiece to replace the damaged one that came with the Meade ETX-90 telescope I bought at a swap meet last year.  I decided it needed to have a web-cam mount so I designed and printed one that is a variation of a previous design for a microscope.  It took about 20 minutes to recreate the CAD file in DesignSpark Mechanical, and about 90 minutes to print on Son of MegaMax.

This thing has an odd shape to accommodate the odd shape of the camera.  I designed the adapter in two pieces so it could be printed without any support material.  After printing the two pieces were glued together with a little super glue.

Unassembled 3D printed WebCam adapter and eyepiece.

Unassembled 3D printed WebCam adapter and eyepiece.

 

Assembled adapter on the eyepiece.

Assembled adapter on the eyepiece.

 

Telescope with WebCam mounted.

The adapter fits over the barrel of the 32mm fl eyepiece and stays put.

 

I shot a short video to test it and it works perfectly!  The cars driving by are about 1/2 mile away.

 

If we ever get a clear night I’ll try shooting Jupiter or Saturn and then run Registax to enhance the images.

Files are here:  https://www.youmagine.com/designs/web-cam-adapter-for-meade-telescope-eyepiece

QWERTY (and nothing else)

QWERTY Keyboard

I built a QWERTY keyboard that types the letters Q, W, E, R, T and Y, and nothing else. No space, no return, no escape.

It’s a fully-functional USB device, you know, as long as you just want to type words that can be composed with Q, W, E, R, T and Y. (WET, WRY, YET, TRY, there’s a bunch of them!)

I wrote plenty more about this project on my blog, and if you want to read about the history of the QWERTY layout, and its connection to Milwaukee, and why the way we interact with technology is interesting and sometime ridiculous, well… I got that too.